RZRSK UART1 Channel to enable
Hi all,I am working on RZRSK EVK UART function, i found free UART1(P4_12_Tx,P4_13_Rx) in JA6. and i found some info on SCI chaneel by using$ cat /proc/tty/driver/sci serinfo:1.0 driver revision:0:...
View ArticleRZRSK Audio Sample Testing
Hi All,Can any one help me how to check audio sample on RZRSK EVK with Linux BSP. if any document to refer please suggest me.if i execute following commands i am getting "amixer: Control default open...
View ArticleRZA1H starter kit debugging application on linux using j link
Hi!I'm trying to develop c++ applications for this board, but I'm struggling with the j-link: I don't know how to use it for application debugging. I can cross compile correctly, but I don't know how...
View ArticleIs Yocto for RZ/A1 working and recommended?
I followed the instructions posted elsewhere in this forum for how to do a Yocto build, using the Renesas RZ/A1 Yocto Meta Layer. It generated an error while building the kernel (details below).I had...
View ArticleClik here to view.
RZ/T1: Program running out to 0x14(reserved handler)
CPU: RZ/T1 R7S910018 (ARMv7-R Cortex-R4 600MHz)Board: RSK+RZT1Probe: I-jetIDE: IAR EWARM 7.4Hi all, I've met a problem puzzles me. When I press "Go" to run on full speed, the program runs out to the...
View ArticleTip for initsct.S file in Starter kit RZ/A1 samples
Hi,I'm working with my RSK demo and step by step I'm finding more and more strange construction in sample files.For example, look into initsct.S file. Part from the label initsct: to teh label...
View ArticleClik here to view.
RZ/T1: Program running out to 0x14(reserved handler)
CPU: RZ/T1 R7S910018 (ARMv7-R Cortex-R4 600MHz)Board: RSK+RZT1Probe: I-jetIDE: IAR EWARM 7.4Hi all, I've met a problem puzzles me. When I press "Go" to run on full speed, the program runs out to the...
View ArticleRZ/A1L number allocatable FIFO buffers
Hi,in the RZ/A1L manual RZ/A1LR01UH0437EJ0200 Rev.2.00May 25, 20151. on page 905 the number of allocatable buffers is described:Receive FIFO buffer: 8 FIFO buffers (up to 96 buffers allocatable to...
View ArticleLicense issue with FreeRTOS demo
I've been adapting a FreeRTOS demo to run on our custom hardware (built around a RZ/A1H), but I just noticed that a number of source files in the "Renesas" folders contain this warning message:...
View Articlee2studio File/New/C project
Hello,I think something wrong is with creating new C/C++ project by File/New/C(C++) Project.When we choose Floating-point ABI as Hard we cannot compile because in Properties/Settings/Archives option -...
View ArticleDMA on RZ/A1H
Hi therei was trying to transfer memory from my externally connected compactflash to the internal memory by using dma transfer.My source address is at 0x8000'0000 (/CS2) with a cache Setting of...
View ArticleRZ/A1L RSCAN0RMNB NRXMB range
Hi,in the RZ/A1L manualR01UH0437EJ0200 Rev.2.00May 25, 20151. on page 952 the register RSCAN0RMNB is described.It says about NRXMB:Set a value of 0 to 31. The maximum value is 16 x(number of...
View ArticleAny HTML5/Javascript engine suitable for RZ/A1H ?
Suppose I wanted to render HTML5/Javascript content, i.e. a UI built with HTML and JavaScript, instead of Qt or similar toolkits.Assuming external SDRAM is available, Is this feasible? Is there a...
View ArticleRZA1RSK: E2studio For Linux 32bit and 64bit
Hi all,I am looking for E2studio for Linux environment.If Linux 32bit and 64bit versions available, please share the links to download.
View ArticleCan I use Lauterbach TRACE32?
We have previously invested in some Lauterbach tools. Any reason why I can not or should not use TRACE32 (with the right JTAG probe) with the RSK+RZA1 and subsequently with my own hardware?If I use...
View ArticleQuick questions on e2 Studio / debugging / j-link
Hi, I've been beginning to work with an RZ/A1L (custom PCB), e2 Studio and a Segger j-link for a couple of months now, and have a couple of questions on things I haven't quite gotten my head around...
View ArticleCMSIS-RTOS Porting question
I just discovered that Renesas released a Board Support Package for CMSIS-RTOS last month (see R01AN3104EJ0203).Can anyone offer guidance as to how to best port this to our custom hardware?My first...
View ArticleProgramming CS0 Flash on RZ using e2studio?
Application note R01AN1957EJ0100 documents how to download code to NOR Flash using the DS-5's Semihosting Function.Does anyone have instructions (or is it even possible) to do the same using...
View ArticleClik here to view.
RZA1H Starter Kit CAN bus linux configuration
Hi!I'm configuring my linux bsp for the starter kit in order to use the can bus. As stated in "kernel_drivers.txt" I enabled the following in kernel...
View ArticleLinux bsp video accelerator
Hi all! This is a simple question. I just wondered if the defaul kernel configuration of the linux bsp provides all the stuff needed to use the video accelerator of the RZA1. :)Thanks in advance!
View Article